MISUMI 29264 Thrust Self-Aligning Roller Bearings

L:115 mm; A2:32.9 mm; C:14 kN; A4:20.5 mm; N:9mm; H3:75; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B1:30.9 mm; T max.:200 °C;

T max.:100 °C; A1:16 mm; s1:24.6 mm; N:16mm; Z:33.4 mm; Weight:2.08 kg; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; T min.:-20 °C; d:45 mm;

Recommended tightening torque for set screw:16.8 Nm; G:M6x1; e:25 mm; C:43.55 kN; B:55.6 mm; Designation of bearing:UC211-32G2T04; J:184 mm; Designation of housing:FA211-; s1:27.8 mm; L1:104 mm;

J:76.2 mm; A:38 mm; Weight:1.22 kg; T min.:-20 °C; H:42.9 mm; s1:19.05 mm; Designation of housing:SPA206N-; C0:11.5 kN; H2:86 mm; Recommended tightening torque for set screw:3.9 Nm;

L:68 mm; Weight:0.61 kg; B:34 mm; J:99 mm; A2:35.7 mm; C:14 kN; s1:17 mm; T max.:100 °C; d:23.81 mm; e:16 mm;

Static Load Rating:76.9 kN; Inner Diameter:120 mm; Dynamic Load Rating:44.9 kN; Outside Diameter:170 mm; Da:153 mm; Radius:1.5 mm; da:136 mm; Oil Holes:2.5 mm; Width:20 mm;

L:120 mm; T min.:-20 °C; J:85 mm; H1:20 mm; H:53.9 mm; C:31.85 kN; Designation of housing:PG209-; d:42.86 mm; G:M6x1; A:54 mm;

Weight:0.96 kg; J:76.2 mm; C:19.5 kN; S:8 mm; Designation of housing:PAE206N-; H2:82 mm; T max.:100 °C; d:30 mm; Z:52.3 mm; L:98 mm;

Dynamic load, C:660 kN; Fatigue limit load, Cu:76.6 kN; Y0:3.13; Mass:7.62 kg; rs min:2.1 mm; B:56 mm; d2:168.5 mm; D1:206.6 mm; Characteristic cage frequency, FTF:0.45 Hz; Number of lubrication holes:3;

H1:15 mm; Designation of housing:P204N-; d:15 mm; B:34 mm; Z:16.4 mm; N1:19 mm; L:127 mm; N:13mm; L1:42 mm; H:33.3 mm;

T min.:-20 °C; S:15.9 mm; G:R1/8"; A4:27 mm; d:31.75 mm; H3:80; N:11,5mm; L:83 mm; A1:12 mm; C:19.5 kN;

Category:Roller Bearings; Mass (without HJ ring):0.21 kg; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:7.76 Hz; Fatigue limit load, Cu:4.55 kN; Characteristic rolling element frequency, BSF:4.97 Hz; da min:35 mm; Nlim (oil):13,000 rpm; dc min:44 mm; F:37.5 mm;

J:160 mm; L:195 mm; d:60 mm; T max.:200 °C; e:1 mm; Designation of bearing:US212G2T20; Recommended tightening torque for set screw:22 Nm; C0:32.8 kN; H3:135; B:53.7 mm;

Weight / LBS:19.382; d:105 mm; da max:132 mm; Dynamic load, C:320 kN; r1s min:3 mm; d1:147 mm; Other Features:1 Rib Inner Ring | 2; Profile:Complete with Outer; E:195 mm; Characteristic cage frequency, FTF:0.41 Hz;

f0:14.7; Da max:35 mm; Static load, C0:3.7 kN; Characteristic outer ring frequency, BPF0:4.58 Hz; Brand:NTN; Min operating temperature, Tmin:-20 °C; rs min:0.3 mm; Max operating temperature, Tmax:120 °C; ra max:0.3 mm; Nlim (grease):10,000 rpm;